BmpCount
Obsah
Description
Alias: BC
Detects the number of bitmap occurrences.
Searches for the Bitmap on the screen and counts the number of its occurrences. The result is stored in the output parameter Count. It is possible to specify masking ( MaskMode, BitmapMaskColor and ScreenMaskColor parameters). The search area is determined by the value of the CaptureMode parameter.
Input parameters
Bitmap
Bitmap type
Detected bitmap.
MaskMode
Number type
Mask mode used for the bitmap search (0=none, 1=user mask, 2=automatic mask).
BitmapMaskColor
Color type
The key color of the user mask in the specified Bitmap (used only if MaskMode=1).
ScreenMaskColor
Color type
Key color of the user mask for the capture, matching the color of the BitmapMaskColor. You should set this value only if these two colors are different.
CaptureMode
Number type
Defines the search area (0=desktop, 1=active window, 2=active region, 3=area of active window, 16=active window client area, 257-264=monitor 1-8, 512-520=active region 0-8).
Enabled
Number type
Enables or disables the command. If the value is 0, the command will not be executed.
PreWait
Number type
Delay in milliseconds before executing the command. It has no effect if Enabled=0.
PostWait
Number type
Delay in milliseconds after executing the command. It has no effect if Enabled=0.
Output parameters
Count
Number type
Number of bitmap occurrences.
