CaptureText
Obsah
- 1 Description
- 2 Input parameters
- 2.1 Bitmap1
- 2.2 Reference1
- 2.3 Bitmap2
- 2.4 Reference2
- 2.5 ClickCount
- 2.6 Button
- 2.7 MaskMode1
- 2.8 BitmapMaskColor1
- 2.9 ScreenMaskColor1
- 2.10 MaskMode2
- 2.11 BitmapMaskColor2
- 2.12 ScreenMaskColor2
- 2.13 Skip1
- 2.14 Skip2
- 2.15 Wait
- 2.16 CaptureMode1
- 2.17 CaptureMode2
- 2.18 Enabled
- 2.19 PreWait
- 2.20 PostWait
- 3 Output parameters
- 4 See also
Description
Alias: CT
Selects and copies text.
Selects text by clicking the Button at the point specified by Reference1 related to Bitmap1 and dragging to Reference2 related to Bitmap2. The selected text is copied using the clipboard and saved in the output parameter Text. The number of clicks in Reference1 is determined by the ClickCount parameter. It is possible to set the timeout with the Wait parameter, skip multiple occurrences with the Skip1 and Skip2 parameters and specify masking ( MaskMode1, BitmapMaskColor1 and ScreenMaskColor1 eventually MaskMode2, BitmapMaskColor2 and ScreenMaskColor2 parameters). The search area is determined by the value of the CaptureMode1 and CaptureMode2 parameters. If any of the bitmaps is not found, the command ends with an error.
Input parameters
Bitmap1
Bitmap type
Bitmap for reference to the start of text selection.
Reference1
Reference type
A reference relative to the Bitmap1 specifying the start of text selection.
Bitmap2
Bitmap type
Bitmap for reference to the end of text selection.
Reference2
Reference type
A reference relative to the Bitmap2 specifying the end of text selection.
ClickCount
Number type
Specifies the number of clicks at the Reference1 position. A value of 0 does not click, a value of 1 means a single click, a value of 2 means a double click, etc. The last click will be released after moving the mouse cursor at Reference2 point.
Button
Number type
Specifies the mouse button to click (0=none, 1=left, 2=right, 3=middle).
MaskMode1
Number type
Mask mode used for Bitmap1 search (0=none, 1=user mask, 2=automatic mask).
BitmapMaskColor1
Color type
The key color of the user mask in the Bitmap1 (used only if MaskMode1=1).
ScreenMaskColor1
Color type
The key color of the user mask on the captured screen corresponding to the color BitmapMaskColor1. It is only need to set this value if the two colors are different.
MaskMode2
Number type
Mask mode used for Bitmap2 search (0=none, 1=user mask, 2=automatic mask).
BitmapMaskColor2
Color type
The key color of the user mask in the Bitmap2 (used only if MaskMode2=1).
ScreenMaskColor2
Color type
The key color of the user mask on the captured screen corresponding to the color BitmapMaskColor2. It is only need to set this value if the two colors are different.
Skip1
Number type
Defines number of Bitmap1 occurrences that are skipped when searched.
Skip2
Number type
Defines number of Bitmap2 occurrences that are skipped when searched.
Wait
Number type
Timeout in seconds for occurrence of searched bitmaps.
CaptureMode1
Number type
Defines the search area for Bitmap1 (0=desktop, 1=active window, 2=active region, 3=area of active window, 16=active window client area, 257-264=monitor 1-8, 512-520=active region 0-8).
CaptureMode2
Number type
Defines the search area for Bitmap2 (0=desktop, 1=active window, 2=active region, 3=area of active window, 16=active window client area, 257-264=monitor 1-8, 512-520=active region 0-8).
Enabled
Number type
Enables or disables the command. If the value is 0, the command will not be executed.
PreWait
Number type
Delay in milliseconds before executing the command. It has no effect if Enabled=0.
PostWait
Number type
Delay in milliseconds after executing the command. It has no effect if Enabled=0.
Output parameters
Text
String type
Text obtained from selected text using the clipboard.
