WaitForColor/en: Porovnání verzí
(Založena nová stránka s textem „Enables or disables the command. If the value is 0, the command will not execute.“) |
(Založena nová stránka s textem „Delay in milliseconds before executing the command. It has no effect if Enabled=0.“) |
||
| Řádek 134: | Řádek 134: | ||
Type [[Special:MyLanguage/Data types#Number | Number]] | Type [[Special:MyLanguage/Data types#Number | Number]] | ||
| − | + | Delay in milliseconds before executing the command. It has no effect if Enabled=0. | |
=== PostWait === | === PostWait === | ||
Verze z 2. 2. 2021, 11:25
Description
Alias: WFC
Waits for the pixel color at Reference1 or anywhere in the area defined by two references.
Repeatedly searches the screen for Bitmap1, or Bitmap2 if specified. Once found, and depending on the value of the WaitMode, it waits for the desired Color to appear or disappear at the location of Reference1 or (in the case of two bitmaps) in a rectangular area delimited by both references. To search for reference bitmaps, the maximum waiting time can be set using Wait, to skip multiple occurrences using Skip1 or Skip2, and to mask the search by using MaskMode1, BitmapMaskColor1 and ScreenMaskColor1 or MaskMode2, BitmapMaskColor2 and ScreenMaskColor2. The search area is specified by the value of the CaptureMode. If none of the bitmaps is found, the command ends in error.
Input parameters
Bitmap1
Type Bitmap
Reference bitmap for the location where the desired color or first corner of the area appears.
Reference1
Type Reference
Reference for the location where the desired color or first corner of the area appears.
Bitmap2
Type Bitmap
Reference bitmap for the second corner of the area. If not specified, the color will be detected in the pixel specified by Reference1.
Reference2
Type Reference
Reference for the second corner of the area.
Color
Type Color
Desired color.
WaitMode
Type Number
Color wait mode (0=wait to display, 1=wait to disappear).
MaskMode1
Type Number
Mask mode used for detecting Bitmap1 (0=none, 1=user mask, 2=automatic mask).
BitmapMaskColor1
Type Color
Key color of the user mask in Bitmap1 (used only for MaskMode1=1).
ScreenMaskColor1
Type Color
Key color of the user mask for the capture, matching the color of BitmapMaskColor1. You should set this value only if these two colors are different.
MaskMode2
Type Number
Mask mode used for detecting Bitmap2 (0=none, 1=user mask, 2=automatic mask).
BitmapMaskColor2
Type Color
Key color of the user mask in Bitmap2 (used only for MaskMode2=1).
ScreenMaskColor2
Type Color
Key color of the user mask for the capture, matching the color of the BitmapMaskColor2. You should set this value only if these two colors are different.
Skip1
Type Number
Specifies the number of times Bitmap1 was skipped during the search.
Skip2
Type Number
Specifies the number of times Bitmap2 was skipped during the search.
Wait
Type Number
Waiting time in seconds for the detected bitmaps to appear.
CaptureMode
Type Number
Defines the search area of Bitmap1 and Bitmap2 (0=desktop, 1=active window, 2=active region, 3=active window area, 16=client part of the active window, 257-264=monitor 1-8, 512-520=active region 0-8).
Enabled
Type Number
Enables or disables the command. If the value is 0, the command will not execute.
PreWait
Type Number
Delay in milliseconds before executing the command. It has no effect if Enabled=0.
PostWait
Type Number
Prodleva v milisekundách po provedení příkazu. Nemá žádný vliv je-li Enabled=0.
