ClickBmpRef/en: Porovnání verzí
| Řádek 7: | Řádek 7: | ||
'''Alias: CBR''' | '''Alias: CBR''' | ||
| − | ''' | + | '''Clicks on the reference related to the bitmap.''' |
Seeks a bitmap given by the [[#bitmap-| Bitmap]] parameter on the screen and then clicks on the related [[#reference-| Reference]] with the button specified by the [[#button-| Button]] parameter. The number of clicks is given by the [[#clickcount-| ClickCount]] parameter. If no reference is specified, it clicks on the center of the found bitmap. It is possible to set the timeout with the [[#wait-| Wait]] parameter, skip multiple occurrences with the [[#skip-| Skip]] parameter and specify masking ([[#maskmode-| MaskMode]], [[#bitmapmaskcolor-| BitmapMaskColor]] and [[#screenmaskcolor-| ScreenMaskColor]] parameters). The search area is determined by the value of the [[#capturemode-| CaptureMode]] parameter. In a case bitmap is not found, the command ends with an error. | Seeks a bitmap given by the [[#bitmap-| Bitmap]] parameter on the screen and then clicks on the related [[#reference-| Reference]] with the button specified by the [[#button-| Button]] parameter. The number of clicks is given by the [[#clickcount-| ClickCount]] parameter. If no reference is specified, it clicks on the center of the found bitmap. It is possible to set the timeout with the [[#wait-| Wait]] parameter, skip multiple occurrences with the [[#skip-| Skip]] parameter and specify masking ([[#maskmode-| MaskMode]], [[#bitmapmaskcolor-| BitmapMaskColor]] and [[#screenmaskcolor-| ScreenMaskColor]] parameters). The search area is determined by the value of the [[#capturemode-| CaptureMode]] parameter. In a case bitmap is not found, the command ends with an error. | ||
Verze z 3. 2. 2021, 09:41
Obsah
Description
Alias: CBR
Clicks on the reference related to the bitmap.
Seeks a bitmap given by the Bitmap parameter on the screen and then clicks on the related Reference with the button specified by the Button parameter. The number of clicks is given by the ClickCount parameter. If no reference is specified, it clicks on the center of the found bitmap. It is possible to set the timeout with the Wait parameter, skip multiple occurrences with the Skip parameter and specify masking ( MaskMode, BitmapMaskColor and ScreenMaskColor parameters). The search area is determined by the value of the CaptureMode parameter. In a case bitmap is not found, the command ends with an error.
Input parameters
Bitmap
Bitmap type
A reference bitmap that, along with the Reference parameter, determines where to click with the specified mouse button.
Reference
Reference type
Reference realeted to Bitmap. Determines the location of the click with the specified mouse button. If this parameter is empty, the center of the found bitmap is used as a reference.
ClickCount
Number type
Specifies the number of clicks. A value of 0 does not click, a value of 1 means a single click, a value of 2 means a double click, etc.
Button
Number type
Specifies the mouse button to click (0=none, 1=left, 2=right, 3=middle).
Key
Number type
Simulates pressing of modifier keys during a click. A value of 0 means no modifier key, otherwise it is possible to use any combination of values 1=Shift, 2=Control, 4=Alt.
MaskMode
Number type
Mask mode used for bitmap search (0=none, 1=user mask, 2=automatic mask).
BitmapMaskColor
Color type
The key color of the user mask in the Bitmap (used only if MaskMode=1).
ScreenMaskColor
Color type
The key color of the user mask on the captured screen corresponding to the color BitmapMaskColor. It is only need to set this value if the two colors are different.
Skip
Number type
Defines number of bitmap occurrences that are skipped when searched.
Wait
Number type
Timeout in seconds for occurrence of searched bitmap.
CaptureMode
Number type
Defines the search area (0=desktop, 1=active window, 2=active region, 3=area of active window, 16=active window client area, 257-264=monitor 1-8, 512-520=active region 0-8).
OnlyIfNotNull
Number type
The command is not executed when the Bitmap parameter value is not specified and value of this parameter is 1.
Enabled
Number type
Enables or disables the command. If the value is 0, the command will not be executed.
PreWait
Number type
Delay in milliseconds before executing the command. It has no effect if Enabled=0.
PostWait
Number type
Delay in milliseconds after executing the command. It has no effect if Enabled=0.
