ToReference/en: Porovnání verzí
(Založena nová stránka s textem „Reference specified by the X, Y parameters and anchored according to the HorizontalAnchor and #verticalanchor-|…“) |
|||
| Řádek 65: | Řádek 65: | ||
Type [[Special:MyLanguage/Data types#Reference | Reference]] | Type [[Special:MyLanguage/Data types#Reference | Reference]] | ||
| − | Reference specified by the [[#x-| X]], [[#y-| Y]] parameters and anchored according to the [[#horizontalanchor-| HorizontalAnchor]] and [[#verticalanchor-| VerticalAnchor]] | + | Reference specified by the [[#x-| X]], [[#y-| Y]] parameters and anchored according to the parameters of the [[#horizontalanchor-| HorizontalAnchor]] and [[#verticalanchor-| VerticalAnchor]]. |
Aktuální verze z 1. 2. 2021, 18:56
Obsah
Description
Alias: TR
Transfers the coordinates and definition of the anchor to the reference point.
Transfers the coordinates provided by the X and Y parameters, together with the definition of the anchor provided by the HorizontalAnchor and VerticalAnchor parameters, to the reference point.
Input parameters
X
Type Number
Horizontal coordinates of the reference.
Y
Type Number
Vertical coordinates oof the reference.
HorizontalAnchor
Type Number
Horizontal anchor (0=left, 1=middle, 2=right).
VerticalAnchor
Type Number
Vertical anchor (0=left, 1=middle, 2=right).
Enabled
Type Number
Enables or disables the command. If the value is 0, the command will not execute.
PreWait
Type Number
Delay in milliseconds before executing the command. It has no effect if Enabled=0.
PostWait
Type Number
Delay in milliseconds before executing the command. It has no effect if Enabled=0.
Output parameters
Reference
Type Reference
Reference specified by the X, Y parameters and anchored according to the parameters of the HorizontalAnchor and VerticalAnchor.
