BmpPos/en: Porovnání verzí
(Založena nová stránka s textem „Coordinate of the top side of the Bitmap occurrence.“) |
(Založena nová stránka s textem „ Number type“) |
||
| Řádek 99: | Řádek 99: | ||
=== Right === | === Right === | ||
| − | + | [[Special:MyLanguage/Datové typy#Number | Number]] type | |
Souřadnice pravé strany nalezeného výskytu bitmapy [[#bitmap-| Bitmap]]. | Souřadnice pravé strany nalezeného výskytu bitmapy [[#bitmap-| Bitmap]]. | ||
Verze z 8. 7. 2020, 13:05
Obsah
Description
Alias: BP
Detects the bitmap position.
Seeks a bitmap given by the Bitmap parameter on the screen and then if a bitmap is found, it stores the occurrence coordinates to Left, Top, Right and Botom parameters. The capture offset is stored in the CaptureLeft and CaptureTop parameters. It is possible to set the timeout with the Wait parameter, skip multiple occurrences with the Skip parameter and specify masking ( MaskMode, BitmapMaskColor and ScreenMaskColor parameters). The search area is determined by the value of the CaptureMode parameter. In a case bitmap is not found, the command ends with an error.
Input parameters
Bitmap
Bitmap type
Detected bitmap.
MaskMode
Number type
Mask mode used for bitmap search (0=none, 1=user mask, 2=automatic mask).
BitmapMaskColor
Color type
The key color of the user mask in the Bitmap (used only if MaskMode=1).
ScreenMaskColor
Color type
The key color of the user mask on the captured screen corresponding to the color BitmapMaskColor. It is only need to set this value if the two colors are different.
Skip
Number type
Defines number of bitmap occurrences that are skipped when searched.
Wait
Number type
Timeout in seconds for occurrence of searched bitmap.
CaptureMode
Number type
Defines the search area (0=desktop, 1=active window, 2=active region, 3=area of active window, 16=active window client area, 257-264=monitor 1-8, 512-520=active region 0-8).
Enabled
Number type
Enables or disables the command. If the value is 0, the command will not be executed.
PreWait
Number type
Delay in milliseconds before executing the command. It has no effect if Enabled=0.
PostWait
Number type
Delay in milliseconds after executing the command. It has no effect if Enabled=0.
Output parameters
Left
Number type
Coordinate of the left side of the Bitmap occurrence.
Top
Number type
Coordinate of the top side of the Bitmap occurrence.
Right
Number type
Souřadnice pravé strany nalezeného výskytu bitmapy Bitmap.
Bottom
Typ Number
Souřadnice spodní strany nalezeného výskytu bitmapy Bitmap.
CaptureLeft
Typ Number
Horizontální pozice prohledávané oblasti v rámci desktopu
CaptureTop
Typ Number
Vertikální pozice prohledávané oblasti v rámci desktopu
